Product ID:DTE OIL EXTRA HEAVY
MSDS Date:01/14/1992
FSC:9150
NIIN:00-068-4164
MSDS Number: BVGXZ

MOBIL OIL CORP ENVIRONMENTAL AFFAIRS & TOXICOLOGY

PENNINGTON-ROCKY HILL RD
PENNINGTON, NJ 08534
US

Emergency Phone: 609-737-4411(CHEMTREC 800-424-9300)

Info Phone: 800-662-4525

Cage: 0AHK0

MOBIL OIL CORP ENVIRONMENTAL AFFAIRS & TOXICOLOGY

PENNINGTON, NJ 08534 US

Cage: 0AHK0

ZINC (SARA III)

CAS: 7440-66-6

RTECS: ZG8600000

Fraction By Weight: 0.08%

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

FATTY ACIDS, TALL OIL, ZINC SALTS

CAS: 61790-11-2

Fraction By Weight: 0.15%

PHOSPHORODITHOIC ACID, O,O-DI C1-14-ALKYL ESTERS, ZINC

CAS: 68649-42-3

Fraction By Weight: 0.9%

CONTAINS TWO (2) OR MORE OF THE FOLLOWING BASE OILS.

RTECS: 9999999ZZ

DISTILLATES, HYDROTREATED HEAVY PARAFFINIC

CAS: 64742-54-7

RTECS: PY8035500

Fraction By Weight: >95%

OSHA PEL 300 PPM

ACGIH TLV: 300 PPM

SOLVENT,DEWAXED RESIDUAL OIL (PETROLEUM)

CAS: 64742-62-7

Fraction By Weight: >95%

HYDROTREATED C25 BRIGHT STOCK BASED LUBRICATING OIL

CAS: 72623-83-7

Fraction By Weight: >95%

DISTILLATES (PETROLEUM), SOLVENT DEWAXED HEAVY NAPHTHENIC

CAS: 64742-65-0

RTECS: PY8038500

Fraction By Weight: >95%

OSHA PEL 5 MG/M3 AS OIL MIST

ACGIH TLV: 5 MG/M3 AS OIL MIST

HYDROTREATED HEAVY NAPHTHENIC DISTILLATE,

CAS: 64742-52-5

RTECS: PY8035000

Fraction By Weight: 0.01%

OSHA PEL 5 MG/M3 OIL MIST

ACGIH TLV: 5 MG/M3 OIL MIST

DISTILLATES (PETROLEUM), HYDROTREATED LIGHT NAPHTHENIC

CAS: 64742-53-6

RTECS: PY8036000

Fraction By Weight: 0.01%

OSHA PEL 5 MG/M3 OIL MIST

ACGIH TLV: 5 MG/M3 OIL MIST

LD50 LC50 Mixture:ORAL LD50 (RAT) IS >5000 MG/KG
Routes of Entry: Inhalation:NO Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:PROLONGED OR REPEATED SKIN CONTACT MAY
CAUSE SLIGHT IRRITATION. EYES/INHALED/INGESTED ARE NOT EXPECTED TO
PRODUCE ANY HARMFUL HEALTH EFFECTS.
Explanation of Carcinogenicity:NO INGREDIENTS OF A CONCENTRATION OF
0.1% OR GREATER IS LISTED AS A CARCINOGEN OR SUSPECTED CARCINOGEN.
Effects of Overexposure:SKIN: REDNESS, RASH, ITCHING.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:EYES: FLUSH WITH PLENTY OF WATER FOR 15 MINUTES. IF
IRRITATION PERSISTS, SEE DOCTOR. SKIN: WASH WITH SOAP AND WATER.
INGESTED/INHALED: NOT EXPECTED TO BE A PROBLEM. IF UNCOMFORTABLE,
SEE A DOCTOR.

Flash Point Method:COC
Flash Point:>440F,>227C
Lower Limits:0.6%
Upper Limits:7.0%
Extinguishing Media:CARBIN DIOXIDE, FOAM, DRY CHEMICAL AND WATER FOG.
WATER OR FOAM MAY CAUSE FROTHING.
Fire Fighting Procedures:WEAR SELF-CONTAINED BREATHING APPARATUS AND
FULL PROTECTIVE GEAR. PREVENT RUNOFF FROM FIREFIGHTING OR DILUTION
FROM ENTERING SEWERS OR WATERWAYS.
Unusual Fire/Explosion Hazard:NONE.

Spill Release Procedures:ABSORB IN INERT MATERIAL. SHOVEL INTO A
CONTAINER AND DISPOSE OF IN ACCORDANCE WITH LOCAL, STATE AND
FEDERAL REGULATIONS. REPORT ANY SPILLS WHICH EFFECT SURFACE WATERS
TO COAST GUARD NATIONAL RESPONSE CENTER AT 800-424-8802.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:STORE AWAY FROM IGNITION SOURCES. KEEP
CONTAINERS CLOSED. STORE IN A COOL, DRY, WELL VENTILATED AREA.
Other Precautions:DO NOT USE MATERIAL FOR AIR COMPRESSORS WHICH PROVIDE
MAKE-UP AIR FOR HUMAN USE; SUCH AS FOR DIVING, SCBA, OR SIMILAR
USES.

Respiratory Protection:NONE NORMALLY REQUIRED UNDER NORMAL CONDITIONS
OF USE AND ADEQUATE VENTILATION.
Ventilation:USE ADEQUATE MECHANICAL VENTILATION.
Protective Gloves:NONE NORMALLY REQUIRED.
Eye Protection:SAFETY GLASSES
Other Protective Equipment:NONE NORMALLY REQUIRED.
Work Hygienic Practices:WASH HANDS AFTER USE AND BEFORE EATING,
DRINKING, OR SMOKING. LAUNDER CONTAMINATED CLOTHES BEFORE REUSE.
Supplemental Safety and Health

HCC:V6
Boiling Pt:B.P. Text:>600F,>316C
Melt/Freeze Pt:M.P/F.P Text:25.0F,-3.9C
Vapor Pres:<0.1 MM HG
Spec Gravity:0.885
Viscosity:156 CS @ 40C
Solubility in Water:NEGLIGIBLE
Appearance and Odor:DARK AMBER LIQUID WITH MILD ODOR

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:EXTREME HEAT.
Hazardous Decomposition Products:CARBON MONOXIDE.

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH LOCAL, STATE AND
FEDERAL REGULATIONS. MANUFACTURER SUGGESTS INCINERATION AT AN
APPROVED FACILITY.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.